GT System USB To UART Bridge (COM4) Driver Download

The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver. Huge Pine Usb To Serial Ports com6 driver direct download was reported as adequate by a large percentage of our reporters, so it should be good to download and install. 2019-01-08 Unzip utility to uncompress the USB - 1x serial port adapter driver download.

Sciologness

The most complete collection of drivers for your computer!

Gt System Usb To Uart Bridge (com4) Driver Downloads

Drivers Catalog ⇒ Port Devices ⇒ AIPHONE ⇒ GT System USB to UART Bridge (COM4)

Drivers Installer for GT System USB to UART Bridge (COM4)

If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link.

Device:GT System USB to UART Bridge (COM4) Drivers Installer
Version:2.0.0.18
Date:2021-02-16
File Size:1.12 Mb
Supported OS:Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8
Download Drivers Installer

GT System USB to UART Bridge (COM4): Drivers List

1 drivers are found for ‘GT System USB to UART Bridge (COM4)’. To download the needed driver, select it from the list below and click at ‘Download’ button. Please, ensure that the driver version totally corresponds to your OS requirements in order to provide for its operational accuracy.

GT System USB to UART Bridge (COM4): Supported Models of Laptops

We have compiled a list of popular laptops models applicable for the installation of ‘GT System USB to UART Bridge (COM4)’. By clicking at the targeted laptop model, you’ll be able to look through a comprehensive list of compatible devices.

#ManufacturerModelDevices
1IBM2374F1427 Devices List
2DellDimension XPSGEN521 Devices List
ASRock Strikes with a New Flagship X99 Extreme11 Motherboard
Greeting High-Performance Alienware Area-51 Gaming System
MSI Adds Two AG270 AIOs to Its Gaming Series
The First Encounter with Be Quiet! Pure Rock CPU Cooler
USB-RS232 Serial Converter Driver Download

Windows 7 64-bit & 32-bit, Windows Vista 64-bit & 32-bit, Windows XP, Windows 2000, Windows Me, Windows 98

Important note regarding Windows 7 and Vista:
The driver MUST be installed 'as Administrator'
Right-click the downloaded EXE file and choose Run as administrator

Download the Windows installer for the USB RS-232 adaptor:
Download for Windows 7/Vista/XP (32-bit)
Download for Windows 7/Vista (32-bit and 64-bit)

If for some reason the above driver does not work, try one of the following:
Download for Windows 7/Vista/XP (32-bit and 64-bit - Alternate driver)
Download for Windows XP, 2000, 98/ME (32-bit only)

For older cables (purchased prior to October, 2010):
Download for Windows 7/Vista/XP (32-bit and 64-bit)
Download for Windows Vista (32-bit only)

Run the installer, then after rebooting, plug the USB end of the adapter into one of the USB ports on the computer.

NOTE: For Windows 7, please use RC build 7100 or RTM Final version. (Installer program will not run on early Windows 7 or Beta versions)

Check the software driver installation

GT System USB To UART Bridge (COM4) Driver Download

1) Open the Device Manager dialog from Control Panel

  • Windows Vista: Start >> Control Panel >> System >> Hardware >> Device Manager
  • Windows XP: Start >> Control Panel >> System >> Hardware >> Device Manager
  • Windows 2000: Start >> Settings >> Control Panel >> System >> Hardware >> Device Manager
  • Windows 98/ME: Start >> Settings >> Control Panel >> System >> Device Manager

2) Click the plus sign (+) next to 'Ports'.

3) If the device is properly installed, 'Serialio.com USB Serial Port' or 'Prolific USB-to-Serial COM Port' will be displayed.


The software driver is properly installed, but the USB-RS232 adaptor does not work as expected

One of the common reasons that software may not work as expected with a USB-Serial adaptor when the devcie is properly installed, is many older programs (and even some new ones) only support a limited number of COM ports (e.g. only COM1 - COM4)

If the USB-RS232 adapter is installed as COM5, it may need to be reassigned to COM1 - COM4 to work with some software.

The following outlines how to to reassign the COM port on Windows XP/2K/Me/98SE

Windows XP

1) Follow steps 1-3 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) In the 'COM Port Number' drop-down select the desired port number. For example if the software requires COM2, select COM2. Note the COM port must have '(in use)' listed next to it, if it does then another device with that name is already installed in the system. After selecting the desire port number, click 'OK.'

5) Click 'OK' again, and the device will show up as being on the same COM port that it was before (i.e., COM5), but should show up on the selected port name when the Device Manager dialog is closed and opened again.

6) Close the Device Manager. Launch the software to use with the new COM port.

Windows 2000, Me, and 98 SE (Second Edition)

Gt System Usb To Uart Bridge (com4) Driver Download Windows 10

1) Follow steps 1 2 of 'Check the software driver installation'above.

2) Right-click on the 'Prolific USB to Serial Port', then click Properties.

3) Click on the 'Port Settings' tab. Click the 'Advanced' button.

4) Uncheck 'Use automatic settings'.

5) Select 'Input/Output range'. Click on 'Change Settings'.

6) Type '02E8-02EF' in the Value box. This value will change the port to COM 4. If COM 4 is in use, you must choose another port. The values for each port are.

  • COM 1: 03F8-03FF
  • COM 2: 02F8-02FF
  • COM 3: 03E8-03EF
  • COM 4: 02E8-02EF

7) Enter the value, then click OK. Click OK again, then click Yes when the 'Creating a Forced Configuration' window appears. Click OK.

8) Restart the computer. The Device Manager can be checked, to see the COM port change.

GT System USB To UART Bridge (COM4) Driver Download

Note: Adaptor may not be exactly as pictured above.
back